Galvanized sheet specification

Important producers and importers:

① Important domestic manufacturers :WISCO, Angang, Baosteel Huangshi, China Metallurgical Hengtong, Shougang, Panzhiang, Handang, Maanshan, Fujian Jingkai, etc.

② The main foreign countries are Japan, Germany, Russia, France, South Korea, etc.

The thickness of galvanized sheet is generally 0.4~2.0.

Large state-owned steel mills with diameter less than 0.4mm do not produce, small private steel mills produce separately. Specifications are 0.35, 0.30, 0.28, 0.25, the thinnest has 0.1, 2.0mm above. Because it is difficult to straighten, prices above 2.0 go up as thickness increases.

There are two kinds of galvanized sheet: hot galvanized sheet and electrogalvanized sheet. Now briefly introduce the two kinds of galvanized sheet national standards.

According to Table 4 of GB/T 2518-2008 Continuous Hot Galvanized Steel Sheet and Steel Strip, the thickness of the hot galvanized sheet is 0.3 ~ 5.0 mm

According to the provisions of GB/T 15675-2008 "Continuous galvanized and Zinc-nickel alloy plated steel plate and steel strip", the thickness of the steel plate is not specified. But according to GB/T 708-2006 "Cold Rolled Steel Sheet and strip size, shape, composition and allowable deviation" Table 2, galvanized sheet thickness is 0.40 ~ 4.00 mm

Galvanized sheet the thinnest thickness of 0.35㎜.

Galvanized sheet thickness specifications are :0.35㎜, 0.40㎜, 0.45㎜.

Galvanized sheet size :710x1420, 750x1500, 750x1500, 750x1800, 800x800, 800x1200, 800x1600, 850x1700, 900x900, 900x1800, 1000x2000.

Galvanized sheet thickness specifications are 0.35 mm, 0.40 mm and 0.45 mm.

According to the production and processing method, galvanized sheet can be divided into:

1. Hot dip galvanized steel plate: the steel plate is immersed in a molten zinc bath, usually attached to a layer of zinc on the steel plate;

2. Alloy galvanized steel plate: This steel plate is also made by hot dip plating. But when it is taken out of the tank, it is broken and heated to 500 degrees to form an alloy film of zinc and iron;

3 Galvanized steel plate: good processing performance, but thin coating;

4. Single and double sided galvanized steel plate;

5. Alloy, composite galvanized steel plate: steel plate made of zinc and aluminum, lead, zinc and other metals. Maybe even a composite coating.

Galvanized sheet is mainly used in construction, household appliances, automobiles, machinery, electronics, light industry and other industries.

The thickness of galvanized steel oxide skin is 0.3-3.0 mm, the customary width is 1000 mm 1250 mm 1500 mm and the length is 2500 mm. Of course, if you have a leveling machine, you can also customize, individual size is more than 1000mm.

Electrolytic plate is really galvanized steel plate, galvanized steel plate has not seen? That's hard to answer. You see hot dip galvanized steel all the time. Same as hot dip galvanized steel plate, only the zinc is thinner, generally smoother, brighter color, no zinc spots.

Galvanized sheet thickness specifications are :0.35㎜, 0.40㎜, 0.45㎜.

Galvanized sheet size :710x1420, 750x1500, 750x1500, 750x1800, 800x800, 800x1200, 800x1600, 850x1700, 900x900, 900x1800, 1000x2000.

According to the production and processing method, galvanized sheet can be divided into the following categories:

1. Hot-dip galvanized steel plate. A steel plate is dipped in a bath of molten zinc, which usually has a layer of zinc attached to it. At present, it is important to use continuous galvanizing process to produce rolled steel plate. The rolled steel plate is continuously immersed in zinc and melted in the galvanizing groove to make galvanized steel plate.

2. Alloy galvanized steel plate. This steel plate is also hot dip plated, but after the tank is broken and heated to 500℃, so that it forms a zinc-iron alloy film. This galvanized sheet has excellent coating adhesion and weldability.

3. Galvanized steel plate. This galvanized steel plate made by electroplating has excellent processing properties. But the coating is thin, corrosion resistance is not as good as hot galvanized sheet.

4. Single and double sided galvanized steel plate. Single-sided galvanized steel plate, that is, galvanized products only on one side. Compared with double-sided galvanized sheet, it has better conformity in welding, coating, rust prevention and processing. In order to overcome the shortcomings of not galvanized on one side, there is another kind of galvanized sheet, plated on the other side of a thin layer of zinc, that is, double-sided differential galvanized sheet.

5. Alloy and composite galvanized steel plate. It is an alloy of zinc and other metals such as aluminum, lead and zinc, or even a composite plated steel plate. This steel plate not only has excellent rust prevention function, but also has excellent coating function.

National standard hot dip galvanized steel sheet zinc layer thickness: according to GB510018-2002, hot dip galvanized steel sheet zinc layer is 180-220g/㎡, without thickness. Grade 1.0 galvanized amount of 220g/㎡. In particular, the products can be added to 275g/㎡, galvanized products are 20-25 years of service life. (At 200g per square meter, the thickness of one side is 0.0143mm.